DJI Mavic 4 Pro(Drone Only)

DJI Mavic 4 Pro is a triple-camera flagship drone built around a 100MP 4/3 CMOS Hasselblad main camera, two large-sensor tele cameras, and an Infinity Gimbal that rotates a full 360 degrees. The aircraft weighs 1063 g, flies for up to 51 minutes, and reaches a top speed of 90 km/h (25 m/s).

Key Features

• 100MP 4/3 CMOS Hasselblad camera with 6K/60fps HDR video
• 1/1.3″ and 1/1.5″ large CMOS dual tele cameras
• Infinity Gimbal with 360° rotation for dynamic camera movement
• 0.1-lux nightscape omnidirectional obstacle sensing
• 51-minute maximum flight time
• DJI O4+ transmission with 30 km 10-bit HDR video

Tri-Camera Imaging System, Master Every Angle

Excels from wide-angle to tele. Features Dual Native ISO Fusion, RAW stacking of up to 5 frames, Free Panoramas, and Subject Focusing across all lenses.

100MP Hasselblad Camera

The 4/3 CMOS Hasselblad camera captures 100MP photos and 6K/60fps HDR video with 15.5 stops of dynamic range, holding exquisite detail across highlights and shadows. It also records 4K/120fps slow motion and supports Hasselblad Natural Colour Solution (HNCS), D-Log, D-Log M, HLG, and Normal colour modes.

Dual Tele Cameras with Large Sensors

The 70mm medium tele camera uses a 1/1.3″ CMOS for portraits and vehicle shots. The 168mm tele camera steps up to a 1/1.5″ CMOS with an f/2.8 aperture and captures 50MP photos. Both record 4K/60fps HDR and support D-Log M, HLG, and Normal.

Infinity Gimbal for Dynamic Camera Movement

Allows for effortless 70° upward shots and full 360° rotation. Reimagine aerial storytelling with fluid, gravity-defying movements. The gimbal range of motion varies with the angle of each axis, wind speed, and flight speed.

51-Minute Flight Time

Delivers flight times of up to 51 minutes for scouting locations, practicing maneuvers, capturing time-lapse shots, and taking panoramic photos.

0.1-Lux Nightscape Omnidirectional Vision

Provides robust safety for night photography, allowing you to create with confidence and efficiency.

30 km HD Video Transmission

Featuring the DJI O4+ video transmission system that enables ultra-long-range 10-bit HDR video transmission of up to 30 km (18.6 miles).

 

Key Specifications

• Aircraft weight: 1063 g
• Maximum flight time: 51 minutes
• Top speed: 90 km/h (25 m/s)
• Maximum photo resolution: 100 MP
• Adjustable aperture: f/2.8 to f/11
• Onboard storage: 64 GB (512 GB on the Creator Combo aircraft)
• Video transmission range: 30 km (FCC) / 15 km (CE, SRRC, MIC)

In the Box

• DJI Mavic 4 Pro × 1
  
• DJI Mavic 4 Pro Intelligent Flight Battery × 1
• DJI Mavic 4 Pro Spare Propellers (Pair) × 1
• DJI Mavic 4 Pro Storage Cover × 1
• USB-C to USB-C Data Cable × 2
• DJI 100W USB-C Power Adapter × 1

Notes

• DJI Mavic 4 Pro must be activated via the DJI Fly app before use.
• The 51-minute flight time was measured with the aircraft flying forward at a constant 9 m/s (32.4 kph) in a windless environment at sea level, with Obstacle Avoidance Action set to Brake, in photo mode, from 100% battery to 0%.
• The 30 km transmission range is achievable only under FCC standards, measured outdoors in an open, interference-free environment. Under SRRC the maximum is 15 km. The figure describes one-way, non-return flight range.
• Nightscape omnidirectional obstacle sensing requires surrounding surfaces with discernible textures and illuminance above 0.1 lux, and ground below that is textured and diffusely reflective. The vision system may be limited near reflective surfaces such as water or snow.
• Do not fly near sources of magnetic or radio interference such as high-voltage lines, power transmission stations, radar stations, mobile base stations, and broadcasting towers.
• All data was collected with a production model in a controlled test environment. Actual experience may vary depending on environment, usage, and firmware version.
• Always observe local laws and regulations, and ensure the aircraft has the relevant certifications and airspace authorizations before flying.
• Product images are for reference only. The actual product may vary.

Returns will be accepted for unopened Items within 30 days of purchase and 15 days on products determined to be faulty at time of manufacture (Determined by DJI) but for Autel Robotics Enterprise Drones only exchange provided on faulty Items managed directly through manufacturer Returned merchandise can be exchanged for identical replacements or a refund of the purchase price. Merchandise cannot be returned if it has been damaged as a result of improper use or accident. Please contact us via our Contact Us for an RMA number prior to shipping your product(s) to us. Products sent to our office without an RMA number will be sent back to the shipper with shipping charges to be collected. Please Note Enterprise Drones are subject to return / exchange directly to DJI under Warranty.
• Please read the following shipping instructions carefully. Product that arrives damaged in shipment, without an RMA number or without appropriate warranty information, will be, returned to the sender non-repaired. Products, damaged through neglect due to improper packaging or in shipment, will have the warranty voided and will be processed and returned to you non-repaired. Note: An example of improper packaging would be sending a product back in an envelope.
• Only products and quantities authorized through the Return Material Authorization process will be accepted. If your RMA packing list is in error, ie. Wrong product description, wrong model number, wrong capacity please contact DronePoint Customer Support prior to shipment.
• All products require stable and sufficient packing material, needed to protect the product from ESD (Electro Static Discharge) influences and possible damage during transport. Required Packaging Steps:
A. Place item in ESD (Electro Static Discharge) Bag (For electronics only.)
B. Wrap with 2 inches of bubble wrap or non-movable foam cushioning
C. Place in sturdy cardboard box. Do not use chipboard, as it is not strong enough to withstand the rigors of transit. Please make sure the corrugated carton is free from defects and is structurally sound. Note: Returning an item in an envelope, will void the warranty.
D. Please write the Return Material Authorization number on outside packaging, on three sides in bold print.
E. When shipping multiple items, each item must be, packed as above, items must not directly touch each other and cannot move inside the packaging. All products must be, packed in individual anti-static bags and in a sturdy cardboard box. Please utilize original packaging when available. DO NOT USE peanuts or packing material that can shift or settle during transit. Warning: Returning an item in an envelope, will void the warranty.
• Send your product to the address located on our Page. Retain a record of your RMA number and all tracking/shipping numbers for your records. This will allow DronePoint to better serve you with possible inquiries.
• Your Return Material Authorization number must be visible on 3 sides of the box. Any package sent in without an RMA number will be returned to you non-repaired.
• Use a traceable carrier. Use a traceable carrier for transport or a signed for service (i.e., Airborne, Fed Ex, UPS, XpressPost, etc.) with the post office (Canadian customers only) as they provide you with a tracking number and proof of delivery. The cost of sending an item to our service center for warranty service, is paid by the customer. DronePoint pays for the return shipment. If upon arrival your products are out of warranty the shipment will be returned to you at YOUR COST.